Use these honey gates to make your own honey tank. When you install a honey gate on your own pail, use a hole saw.
IMPORTANT: You MUST USE ONLY food-approved, white plastic tanks when making your own honey tank.
For a 1-1/4 inch gate use 1-5/8 inch hole saw, for 1-1/2 inch gate use 2 inch hole saw and for a 2 inch gate use 2-3/8 inch hole saw.
1-1/4″ Specs:
Inside diameter: 1-1/4″
Outside diameter of threads: approx. 1-5/8″
Hole size to drill: 1-5/8″
Nominal thread size: NPS 1-1/4
O-ring size: ORING1 1.96″ OD x 1.72″ ID x 1/8″
Gasket size for thread seal: GASKET1 1-3/8″ ID
1-1/2″ Specs:
Inside diameter: 1-1/2″
Outside diameter of threads: approx. 1-13/16″
Hole size to drill: 1-7/8″ or 2″
Nominal thread size: NPS 1-1/2
O-ring size: ORING2 2.11″ OD x 1.9″ ID x 1/8″
Gasket size for thread seal: GASKET2 1-3/4″ ID
2″ Specs:
Inside diameter: 2″
Outside diameter of threads: approx. 2-1/4″
Hole size to drill: 2-3/8″
Nominal thread size: NPS 2
O-ring size: ORING3 2.63″ OD by 2.3″ ID” ID x 0.016″
Gasket size for thread seal: GASKET3 2-1/4″ ID